2.3L Engine
Pistons, rods, valves are usually special order items
Terms of sale for special orders apply |
ARP Head Studs |
 |
$167.00 |
ARP Main Studs |
 |
$117.00 |
Clevite 77 Main Bearings
|
 |
$65.00 |
Clevite 77 Rod Bearings
- Set of 4 rod bearings
- Rod bearings
- CB-1838AL
|
|
$45.00 |
Clevite 77 Rod Bearings
- Set of 4 rod bearings
- Rod bearings
- CB-1839AL-.25mm
Connecting Rods With Housing Bore Resized .002″ Larger Than Stock
|
|
$45.00 |
Clevite High Performance Rod Bearings
- Set of 4 rod bearings
- CB-1838H
H-Series Performance, No Dowel Hole In Cap Half
|
|
$50.00 |
Clevite High Performance Rod Bearings
- Set of 4 rod bearings
- CB-1838HX
H-Series Performance,Bearing Walls .0005″ Thinner For .0010″ More Oil Clearance, No Dowel Hole In Cap Half
|
|
$59.00 |
ACL Main Bearings
|
 |
$TBA |
ACL Rod Bearings
|
|
$TBA |
ACL Rod Bearings
- Set of 4 rod bearings
- Rod - .002" oversize OD version
|
|
$TBA |
ACL RACE Rod Bearings
|
|
$TBA |
ACL RACE Rod Bearings
- Set of 4 rod bearings
- Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts.
|
|
$TBA |
Crankshaft / Connecting Rods |
Eagle Connecting Rods
|
 |
$300.00 |
Pauter Connecting Rods
- Pauter pictured installed on the right
- Pistons not included
|
 |
$795.00 |
Cosworth A-beam |
|
$859.00 |
Carillo PRO-H w/CARR Multiphase bolts
- F-DT23>-66094S
- STRAIGHT H-BEAM
The stoutest beam configuration available. It is
capable to handle the most abusive forces in an
engine.
|
|
$1280.00 |
Carillo PRO-H w/H-11 tool steel bolts
- F-DT23>-66094H
- STRAIGHT H-BEAM
The stoutest beam configuration available. It is
capable to handle the most abusive forces in an
engine.
|
|
$1110.00 |
Carillo PRO-SA
- F-DT23<SA-66094H
- With an increased beam thickness, the Super A-Beam
design has a higher load capacity than the regular Abeam
design
|
|
$965.00 |
Carillo PRO-A
- F-DT23-1<A-66094H
- A light weight rod design for high engine speeds and
limited cylinder pressures.
|
|
$930.00 |
Forged Pistons |
Wiseco Pistons
- 8.8 to 1 compression for turbo applications
- Moly skirt coating
- Includes rings and wrist pins
- Scaled from the manufacturer
|
 |
$480.00 |
Wiseco Pistons
- 11.0 to 1 compression for naturally aspirated applications
- Moly skirt coating
- Includes rings and wrist pins
- Scaled from the manufacturer
|
|
$480.00 |
SuperTech Valves
 |
| Intake valves |
|
| 35mm(Std) Flat |
|
| 36.75m(+1.75)Flat |
|
| 36mm(+1.0) Dish |
|
| 36mm(+1.0)Flat |
|
| Exhaust valves |
|
| 30mm(std)Flat |
|
| 31mm(+1.0)Dish Inconel |
|
| 31mm(+1.0)Dish |
|
| 31mm(+1.0)Flat |
|
| 32mm(+2.0)Flat |
|
|
SuperTech Valve Springs and Titanium Retainers
  |
Seat Pressure
|
Max Lift |
|
| 83 @ 35 |
14.3mm |
|
| 70 @ 36.2 |
15.2mm |
|
| 55 @ 35 |
14.3mm |
|
|
SuperTech Cam Follower |
|
|
