Mazda 3

SPC Camber Kit Rear Arm Set

• Pair for both sides
• Rear Camber Adjustment: -1.5 degree to +5.0 degree

Eibach Camber Kit Rear Arm Set

• 5.67420K
• Pair for both sides
• Rear Camber Adjustment: -1.5 degree to +5.0 degree

• 90706
• Free shipping in lower 48 states

• 30 way adjustable
• Recommended Standard Spring Rate 7k front 5k rear
• Custom spring rates available but only recommended for special applications

Tanabe Lowering Springs

• 1.5 front and 1.1 rear inch drop
• 3.0 front and 2.1 rear kg/mm spring rates
• Click here for picture of drop on sedan

• 5545.140
• 1.2 inch front 1.2 inch rear drop

• 4.4555
• 1.8 inch front 1.8 inch rear drop

• SKM66-AUB00
• 1.6 inch front 1.1 inch rear drop
• Spring Rate 160 lbs/inch front, 240 lbs/inch rear

• 1.0 inch front, 0.6 inch rear drop
• Spring Rate 150 lbs/inch front, 220 lbs/inch rear

• 1.3" inch front, 1.3" inch rear drop
• 190 lbs. front, 170 lbs. rear

• 51643
• 1.3 front, 1.2 rear inch drop

• 1130-2006
• KONI shock and spring kit. Includes for sport shocks and lowering springs. Lowers car Approx. 40mm.

• 1020 6182
• 1.2 inch front 1.2 inch rear drop

• 2150 4040
• Non adjustable dampers
• 1.2 inch front 1.2 inch rear drop

• 2100 4040
• Full Set Replaces All 4 dampers
• Excellent ride quality on all road surfaces
• Pair with Eibach springs for 1"-1.5" lowering
• Gold metallic finish shocks
• Less expensive than electronic systems
• Lifetime Warranty

• 8750-1087L
  8750-1087R
  8050-1107
• Entry level performance shock absorber
• Compliments lower springs
• Perfect for OE replacement or vehicle improvement
• Non-adjustable
• Lifetime Warranty
• Set Replaces All 4 dampers

• 8750-1087L
  8750-1087R
• Entry level performance shock absorber
• Compliments lower springs
• Perfect for OE replacement or vehicle improvement
• Non-adjustable
• Lifetime Warranty
• Priced individually

• 8050-1107
• Entry level performance shock absorber
• Compliments lower springs
• Perfect for OE replacement or vehicle improvement
• Non-adjustable
• Lifetime Warranty
• Priced individually

• 8741-1487LSport
  8741-1487RSport
  8040-1350Sport
• 5 way adjustable
• Twin Tube Low Pressure Gas
• Externally Adjustable
• Big handling improvements
• Reasonable ride quality
• Rebuildable for custom vehicle setups
• Best KONl shock for all lowering springs
• Lifetime Warranty
• Set Replaces All 4 dampers

• 8741-1487LSport
  8741-1487RSport
• 5 way adjustable
• Twin Tube Low Pressure Gas
• Externally Adjustable
• Big handling improvements
• Reasonable ride quality
• Rebuildable for custom vehicle setups
• Best KONl shock for all lowering springs
• Lifetime Warranty
• Priced individually

• 8040-1350Sport
• 5 way adjustable
• Twin Tube Low Pressure Gas
• Externally Adjustable
• Big handling improvements
• Reasonable ride quality
• Rebuildable for custom vehicle setups
• Best KONl shock for all lowering springs
• Lifetime Warranty
• Priced individually

• Backed by Bilstein's limited lifetime warranty
• Front Struts
• Set of 2
• Special Order

• Backed by Bilstein's limited lifetime warranty
• Front Struts
• Set of 2
• Special Order

• Part # 35275010 Variant 3 Coilovers
• Compression and rebound are separately adjustable
• Stainless steel
• Installation Instructions here
• Setup Manual here
• Free shipping in lower 48 states

• Part # 15275010 Variant 2 Coilovers
• Rebound is adjustable
• Stainless steel
• Installation Instructions here
• Setup Manual here
• Free shipping in lower 48 states

• Part # 10275010 Variant 1 Coilovers
• Stainless steel
• Installation Instructions here
• Free shipping in lower 48 states

• 336 lb/in front, 280 lb/in rear spring rate
• Free shipping in lower 48 states

• 16 way adjustable

Tein EDFC

• EDK04-K4469, EDK05-12120
• for Tein SS Coilovers

• Height adjustable only

H&R Coilovers

• 29197-3
• Item usually has a wait due to high demand and low stock inventory, contact us if this is a concern.
• Please e-mail us to check stock of this item before purchasing

• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• 36 way adjustable
• Inverted Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• Stiffer spring rates for road race use only
• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

H&R Wheel Spacers

• Footnote* If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.

Hotchkis Swaybars

• 29mm front hollow for reduced weight
  35% stiffer
• 32mm rear hollow for reduced weight
  2 way adjustable
  95% - 140% stiffer

• 22mm adjustable

Prothane Front Sway Bar Bushing Kit

• Bushings for front sway bar
• Red or black - Red is usually in stock

Prothane Rear Sway Bar Bushing Kit

• Bushings for rear sway bar
• Specifty 18mm or 19mm
• Red or black - Red is usually in stock

GT Spec Trunk Cage

• GTS-SUS-1379
• Hatchback only!
• Please email to check stock before ordering

GT Spec Trunk Cage

• GTS-SUS-1382
• Sedan only!
• Please email to check stock before ordering

GT Spec Rear Lower Tie Brace

• GTS-SUS-1125
• Please email to check stock before ordering

GT Spec 4 Point Ladder Brace

• GTS-SUS-1135
• lower bar in photo
• Please email to check stock before ordering

GT Spec 4 Point Brace

• GTS-SUS-1190
• upper bar in photo
• Please email to check stock before ordering

GT Spec Mid Chassis Brace

• GTS-SUS-1158
• Please email to check stock before ordering

GT Spec Rear Lower Tie Brace

• GTS-SUS-1126
• Please email to check stock before ordering

GT Spec Trunk Reinforcement Bar

• GTS-SUS-1129
• Please email to check stock before ordering

GT Spec Rear Reinforcement V Brace and Panel Combo

• GTS-SUS-1127 Link Panel
• GTS-SUS-1128 V-Brace
• Please email to check stock before ordering

GT Spec Front Strut Bar

• Please email to check stock before ordering