Mazdaspeed Protege

• Replaces All 4 Struts
• Factory supplied Mazda Struts from the Mazda Dealer
  If you have a MP3 or MSP this is the exact replacement you need if you do not want your rear ride height to change from a strut replacement

• Factory supplied Mazda Struts from the Mazda Dealer
• Left - driver side
• Right - passenger side

• Factory supplied Mazda Struts from the Mazda Dealer
  If you have a MP3 or MSP this is the exact replacement you need if you do not want your rear ride height to change from a strut replacement
• Left - driver side
• Right - passenger side

• Racing Beat - Factory Mazdaspeed Protege/ MP3 Swaybars
• 25mm front and 20mm rear
• 1 set new in box available

• Required to convert P5 to the Mazdaspeed Protege Swaybar set
• 1 new in box available

• 5540.140
• 1.4 inch front 1.8 inch rear drop

• SKM46-AUB00
• 2 inch front,1.4 inch rear drop
• Spring Rate 179 lbs/inch front, 145 lbs/inch rear

• SKM46-BUB00
• 1.3 inch front .3 inch rear drop
• Spring Rate 162 lbs/inch front, 129 lbs/inch rear

• 1.3 inch drop
• *Drop on MSP will be less than stated due to lower factory springs

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• 5 way adjustable
• Replaces All 4 Struts
• Rear struts perches are lower than factory Mazda versions by approx 5mm

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• 5 way adjustable

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• 5 way adjustable
• MP3 and MSP - Rear struts perches are lower than factory Mazda versions by approx 5mm. Please keep in mind if you are reusing your original factory springs.

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• Non-Adjustable Performance Strut
• Replaces All 4 Struts
• MP3 and MSP - Rear struts perches are lower than factory Mazda versions by approx 5mm. Please keep in mind if you are reusing your original factory springs.

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• Non-Adjustable Performance Strut

• Aftermarket version fits all 99-03 Protege, Protege5, MP3, MSP
• Non-Adjustable Performance Strut
• MP3 and MSP - Rear struts perches are lower than factory Mazda versions by approx 5mm. Please keep in mind if you are reusing your original factory springs.

• 5 way adjustable
• Replaces 4 Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• 5 way adjustable
• Replaces Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• 5 way adjustable
• Replaces 4 Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• OEM Replacement
• Replaces All 4 Struts

• OEM Replacement

• OEM Replacement

• Part # 15275003
• Rebound is adjustable
• Stainless steel
• Installation Instructions here
• Setup Manual here

• 30 way adjustable
• Standard Spring Rate 7k front 5k rear
• These are made to order and takes 3 weeks to ship
• Custom spring rates available
• SWIFT Spring upgrade available
• Assist spring upgrade available

• Height adjustable only

• 16 way adjustable

• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• 36 way adjustable
• Inverted Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• Stiffer spring rates for road race use only
• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

D2 RS Coilovers

• 36 way adjustable
• Pillow ball upper mounts

Pedders Front Control Arm Bushings

• Urethane bushing replacements
• For both sides
• 1 set in stock as of 11/18/11

Pedders Rear Trailing Arm Bushings

• Urethane bushing replacements for factory trailing arms
• For both sides
• 1 set in stock as of 11/18/11

Whiteline Front Control Arm Bushings

• Urethane bushing replacements for factory trailing arms
• For both sides
• Special ordered - requires a wait

OEM MSP/MP3 Swaybar Bushings

• 25mm
• Revised part # for reduced noise from worn bushings
• 2 bushing set for factory MP3/MSP front swaybar
• MP3, MSP only!

Urethane Rear Swaybar Bushings

• 20mm
• 2 bushing set for factory MP3/MSP rear swaybar
• MP3, MSP only!

• Front pair

• Rear pair

H&R Wheel Spacers

• Footnote * If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.

• +/- 1.75 Degree Camber
• 1 kit does 1 axle

• +/- 1.75 Degree Camber
• 1 kit does 1 axle

• +/- 1.75 Degree Camber
• 1 kit does 1 axle

Progress Auto Technology Rear Swaybar

• 22mm
• Comes with urethane bushings and new brackets
• Reuses stock endlinks
• Metallic gray finish

Agency Power Adjustable Endlinks

• Rear Set

AWR Adjustable Endlinks

• Front & Rear Set

AWR Adjustable Endlinks Front

• Front set

AWR Adjustable Endlinks Rear

• Rear set

• 2.0 inch front 2.0 inch rear drop
• *Drop on MSP will be less than stated due to lower factory springs

• .5-3 inch drop