Mazda Protege / MP3

• 5 540.140
• 1.4 inch front 1.8 inch rear drop

• SKM46-AUB00
• 2 inch front,1.4 inch rear drop
• Spring Rate 179 lbs/inch front, 145 lbs/inch rear

• SKM46-BUB00
• 1.3 inch front .3 inch rear drop
• Spring Rate 162 lbs/inch front, 129 lbs/inch rear

• 1.5-2" inch front 1.5-2" inch rear drop

• 5 way adjustable
• Replaces All 4 Struts
• Rear struts perches are lower than factory Mazda Tokicos

• 5 way adjustable

• 5 way adjustable
• Rear struts perches are lower than factory Mazda Tokicos

• Non-Adjustable Performance Strut
• Replaces All 4 Struts
• Rear struts perches are lower than factory Mazda Tokicos

• Non-Adjustable Performance Strut

• Non-Adjustable Performance Strut
• Rear struts perches are lower than factory Mazda Tokicos

• 5 way adjustable
• Replaces 4 Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• 5 way adjustable
• Replaces Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• 5 way adjustable
• Replaces 4 Struts With Insert Cartridges
• Modification to Factory Strut Necessary to Install

• OEM Replacement
• Replaces All 4 Struts

• OEM Replacement

• OEM Replacement

• Part # 15275003
• Rebound is adjustable
• Stainless steel
• Installation Instructions here
• Setup Manual here

• 15 way adjustable
• Monotube dampers w/oversized pistons
• Pillow ball upper mounts

• 10 way adjustable
• Twin tube dampers
• Pillow ball upper mounts

• 16 way adjustable

• Height adjustable only

• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• 36 way adjustable
• Inverted Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

• Stiffer spring rates for road race use only
• 36 way adjustable
• Monotube
• Front pillow ball upper mounts and rear rubber bushing upper mounts.

Pedders Front Control Arm Bushings

• Urethane bushing replacements
• For both sides

Pedders Rear Trailing Arm Bushings

• Urethane bushing replacements for factory trailing arms
• For both sides

OEM MSP/MP3 Swaybar Bushings

• 25mm
• Revised part # for reduced noise from worn bushings
• 2 bushing set for factory MP3/MSP front swaybar
• MP3, MSP only!

Urethane Rear Swaybar Bushings

• 20mm
• 2 bushing set for factory MP3/MSP rear swaybar
• MP3, MSP only!

• Front pair
• Specify MSP/MP3, Protege5, or Sedan

• Rear pair
• Specify MSP/MP3, Protege5, or Sedan

• +/- 1.0 Degree Camber

Progress Auto Technology Rear Swaybar

• 22mm
• Comes with urethane bushings and new brackets
• Reuses stock endlinks
• Metallic gray finish

Agency Power Adjustable Endlinks

• Rear Set

AWR Adjustable Endlinks

• Front & Rear Set

AWR Adjustable Endlinks Front

• Front set

AWR Adjustable Endlinks Rear

• Rear set

GT SPEC Trailing Arm Bars

GT SPEC Rear Reinforcement V Brace and Panel

• V-Brace and Link Panel Combo Set
• V-Brace
• Link Panel

GT Spec Complete Trunk Cage

• Parts can be pieced together below
• MSP requires removal of rear deck subwoofer enclosure

GT SPEC Trunk Reinforcement Bar

GT SPEC Rear 4 Point Linkage Bars

GT Spec Complete Trunk Cage

• Parts can be pieced together below
• P5 only

GT Spec Rear Strut Bar

• P5 only

GT SPEC Trunk Reinforcement Bar

• P5 only

GT SPEC Rear 4 Point Linkage Bars

• P5 only

• 2.0 inch front 2.0 inch rear drop
• *Drop on MSP will be less than stated due to lower factory springs

• 1.3 inch drop
• *Drop on MSP will be less than stated due to lower factory springs

D2 RS Coilovers

• 36 way adjustable
• Pillow ball upper mounts

• .5-3 inch drop